Equipment Vendors

SITEMAP

BLOG

Last Updated:  05-20-14

Baker's Gas & Welding CandCNC Corel Free DXF HYPERTHERM LubeCorp Manufacturing Inc. ARTSOFT MACH3 PRECISION PLASMA LLC Steel F/X SHEETCAM COPYRIGHT 2014 DESERT FABWORKS LLC - ALL RIGHTS RESERVED- WEB DESIGN BY: DESERT WEB MARKETING LLC    -     Contact Us   - Cascade Metal Designs BUILD PAGE 5 BUILDING THE WATER TABLE CONTINUED

This is our center support that runs down the table.  It locks the slats in place and keeps them from twisting or tipping.  The slats  lock in easily but are rock solid once in.

You can see the center notched slat support running the length of the table.

The small pieces on either side of the center support are ½ square tube which raises the slats off the table floor.

So here is how it all comes together.


The slats have a nice arc and are supported and level across the entire table.



The center support keeps the slats from wanting to tip or wiggle.

Here it is all coming together.

My steel supplier only had 6 of the 9 sticks that I needed so I will have to wait until the rest comes in.

Yes that is some nice rust that is how they came.  Luckily they did not charge me extra for the pretty colors.



You can see the  ½ gap under the slats which will help with fluid flow to the drains.

CONTINUED ON BUILD PAGE 6